Enclosed Water Cooling System

Huaxin specialize in the design,research,manufacture and sale of the Water Cooling equipment. Main products: Closed Cooling Water, Transverse Flow Cooling Tower, Countercurrent Tower, Refrigerating Machine and Evaporative Machine etc.

Company has the extensive products,we can also provide other relative accessories and technical consultation at the same time.Keeping improving is our constant purpose, every step we can do better from the selection of the raw material to the research and manufacture of a series products.We consider more for our clients

Working principle of the internal circulating water system: the circulating water enters the heat exchanger (also called closed cooling tower tray tube) after heat exchange and temperature rise, and then sends the heat to the outside through the heat exchanger tube. The cooled circulating water is sent to the heat source by the system circulating water pump.

1.Advantage of closed water cooling system

1) Fully enclosed circulating cooling, eliminate the pipeline jams caused by debris.

2) Use soft water circulating cooling; no overheat damage of power supply, silicon control, capacitor, IGBT module induction coil caused by incrustation.

3) No need of water pool and cooling tower, occupies small area, and moves easily.

4) High cooling efficiency and low operate cost.

5) Low water consumption, meet requirement of environment protection.

6)No ionic conduction in soft water, the cooling part will not be broken by the electrolysis.

2. Main components of closed water cooling system

1) Main Part

The main unit of cooling tower consists of housing, purple copper cooler, exhaust system, spray system, water separator, and collecting annulus.

2) Main Part Shell

It is made of stainless steel plate, 2mm thick. Its resistance to corrosion is as well as stainless steel. The housing is pieced together without welding after cutting, folding and rinsing by numerical control machine.

3 ) Cooler

The key part of cooling tower. Its inside connects coolant, and the outside is designed to be cooled by the air cooling and water spraying to meet the cooling demand. In order to ensure the cooling effect, cooler is made of T2 purple copper tubes which are in accordance with international standard, and all tubes are bare purple copper tubes without fins.

4 ) Fan

This system exhausts saturated hot and moist air from main unit room of cooling tower steadily in the airflow way of getting air in through the air intake under the main unit room and getting air out through the upper fan opening. Exhaust system consists of air grid, fan and shield. The fan uses aluminum case, increasing its useful life.

5) Water Separator

The main function of water separator is to reduce the water consumption of outside loop water cooling system in the working process.

6 ) Auxiliary Machinery

Auxiliary engine, consisting of master pump, stainless steel water tank electric cabinet, temperature-control system, pressure-control system, etc., mainly performs as control system for cooling tower.